1

Your cart is empty.

A 3Doodler 3D Printing Pen with Review Won't Answer These 13 Questions

A 3Doodler 3D Printing Pen with Review Won't Answer These 13 Questions

$0.00


★★★★★ A 3Doodler 3D Printing Pen with review will not answer these 13 questions. Get the truth from people who own a 3Doodler 3D Printing Pen with, including the fact that it won't...

QUESTION: IS IT SAFE FOR 6 YEARS OLD TO HAVE IT?
Not without supervision. The tip gets hot, about as hot as a glue gun. A 6 year old may be inclined to experiment with laying the plastic on their clothing on skin, which cause painful burns. Used properly it is quite safe and fun
With supervision, absolutely! There is a rubber cushion that protects the user from the tip, which is hot enough to melt and extrude plastic (375-450F depending on the plastic). This cushion is not very well secured and can easily be removed, for cleaning I suppose. The burn is consistent with touching a hot pan or baking sheet, typically no worse than 1st degree so have some aloe on hand. The device is rather bulky, so the little one will probably need two hands to hold the 3Doodler. It has some pilot holes for a handle, but I was not able to find a handle. Although the tip is very hot, the plastic cools quickly, almost like hot wax. Have the aloe vera at the ready in the event of any unpleasantness. I find cooking more dangerous than this device =D
It would be safe for a responsible 6 year old that is interested trying it out who is playing together with an adult. The very tip of the pen is very hot so you have to be careful not to touch it. You should only use the pen in a well ventilated space, preferably with a small fan. When you are done with the pen you have to put it away properly: it has to be off and unplugged and you should wait until it has cooled off. The adult playing with the 6 year old can make sure these things happen. The pen requires a bit of practice to be able to do what you want. You and the child can learn how to use the pen together and you can help out if the child is impatient or frustrated. The pen is a serious tool but, just like with scissors, if you use it properly, there are no problems. 3d doodling is a unique and amazing medium and ex ploring it together with your child is a great gift.
Absolutely NOT! - unless you let your kids handle soldering guns and blow torches, this is an extremely hot device that I have burned myself with several times. Hope that helps...

QUESTION: HOW MUCH TIME DOES IT TAKE FOR THE PLASTIC TO MELT, SO THAT WE CAN START USING DOODLE PEN TO MAKE OBJECTS ?
seconds!
fairly quick, but takes some getting use to. Hard to get use to

QUESTION: HOW MUCH OF THE FILIEMENT IS NEEDED TO MAKE ANYTHING? I MEAN, DO YOU HAVE TO BUY REFILL PACKS OFTEN ?
The filament sticks are like a glue stick for a hot glue gun. You go through them quickly. The 3Doodler pen is more reliable than the YaYa pens (doesn't clog as much). You have to remember to extrude the plastic all the way through before unplugging each use or it may get clogged. Doodler uses a thicker filament than the regular 1.75 on standard 3D printers, so you can't interchange (a negative in my opinion). Keep that in mind while you grow your 3D maker space.
Yes. It uses an insane amount of plastic
I use the 3doodler with my students and yes, you can definitely make some objects without buying more refills. That said, I have bought refills because we use the 3doodler a lot.
This is a gift for my grandson and I haven't given it to him yet. So, it hasn't even been opened. I may know more after I give it to him next week but right now I am totally in the dark about your question. Sorry I can't help.

QUESTION: CAN YOU USE THE 1.75MM FILAMENT WITH IT?
No
You cannot use 1.75 filament.

QUESTION: WHAT KIND OF PLASTIC DOES THIS USE?
You can use either the PLA or the ABS plastic. The ABS plastic is cheaper, about 1/2 that of the PLA as I recall. My 13 year-old son has used both, likes both. They have slightly different properties which they explain on the 3Doodler website. He has made some amazing sculptures with his 3Doodler, lots of fun.
I think we got PLA with ours, but it does use both ABS and PLA, both plastics are common in the 3D printing industry
Abs plastic. 3mm
The 3doodler can use both ABS and PLA plastic. The strands or spool have to be 3mm diameter. ABS and PLA have slightly different characteristics that you might care about. You can read about that here: http://the3doodler.com/2014/11/14/abs-vs-pla-whatwillyouchoose
it comes with the device. Not sure what it is
This uses either PLA or ABS. It has a button on the side for either. 3mm filament.

QUESTION: IS THE 3D DOODLER APPRORPIATE FOR A 9 YR. OLD
Yes
Yes
No

QUESTION: DOES THE PLASTIC ADHERE SECURELY TO PAPER?
This was a gift for my niece she used it about an hour and it died. The Doodle customer service was NON RESPONSIVE when we tried to work with them. I would not recommend this company or product! Amazon was amazing in the return process!!
No, I've had a few different makes of these pens None do what there supposed to do... Stay away from these items
Like the other customers here, we bought this product and it never worked. We replaced it and the second product also failed to work. Steer clear and sorry not to be more helpful.
Not really, it's takes a bit of work. In the end not sure if this product was worth the purchase or price.
The Plastics don't adhere to papers. My 9- and 12-year-old children had fun using it. They tried first to write their names into 2D then they made simple 3D shapes.

QUESTION: WHEN WILL THIS ITEM SHIP??
It ships now!

QUESTION: HOW DOES IT WORK?
3Doodler heats up filament, then expels it much like toothpaste from tube. Filament cools very fast, so shapes are maintained as you desire.
You just have to fill the pen with the refills from top that come with it. Press the button on the pen when you want to start drawing. It is easy to learn. Refills are also available at Staples.
The 3Doodler squirts out the hot plastic as you move the tip of the pen in the air and cools so quickly that it holds the shape that your movement traced out.

QUESTION: WHAT SIZE FILAMENT DOES IT TAKE?
3mm

QUESTION: COULD THIS AND OTHER 3D PRINTING PENS BE USED (SORT OF LIKE A HEAT GUN) TO WELD TOGETHER OBJECTS PRINTED WITH A 3D PRINTER?
Yes
Maybe it could if you were welding very small parts, say less than a 2 mm. other wise I would doubt it would work, the plastic cools within a 7 to 9 seconds. Additionally the fix would be very messy and I suspect the bond would be poor. Just my opinion of course.
Yes
Yes
Yes

QUESTION: IS IT REALLY AWESOME?
Yes
Yes

QUESTION: HOW HOT DOES THIS GET? IS IT APPROPRIATE FOR YOUNG SCHOOL AGE CHILDREN?
The tip gets hot enough to burn, but only the tip and there is no real reason to touch it. I'd say it's fine for children under adult supervision until they are comfortable with it. It is a lot of fun.
I don't think so.

QUESTION: WHAT IS THE AMAZON ASIN NUMBER FOR THIS PRODUCT?
The ASIN is B00IFCJKYW

Lowest Price as of today is on Amazon.com click here.